20 Things You Need To Be Educated About Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs

Is your uPVC window or door mechanism not working properly? Maybe the window or door handles don't meet up correctly or are difficult to use.

You'll be wasting energy if your double-glazed doors don't work properly. This increases the chance of burglary. Owen the Locksmith can fix your door lock for a reasonable price.

Snapped Key

It can be quite frustrating when a key gets stuck into the lock. It's also potentially an issue for security, since the door might not lock and make you open to intrusion. There are fortunately simple fixes you can use to solve the problem and get your door working correctly.

Be calm. If you get scared and start doing a lot of fumbling around you may end up pushing the broken piece of the key even further into the lock, which could make the situation even more difficult.

Spray WD-40 or another penetrating lubricant into the lock. This will help the broken piece come out more easily. You can also employ a screwdriver in order to break up any stuck pieces that might be hindering the flow. If you're lucky enough to have a little bit of the key left visible and you want to remove it, make use of a paperclip or other thin metal object to grab it and remove it. Both of these methods work well, but be very careful not to push the damaged piece of the key even further into the keyway.

Some paperclips have grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't have any of these, you can bend a hook using needle-nosed pliers. You can also use a pair tweezers to grasp and pull out the last piece of broken keys.

If  Maidstone double glazing  are unable to remove the broken key piece Use a lock deicer. This is usually available at most hardware stores. It works by freezing any water or ice that could be inside the lock.

If none of these solutions seem to work, it might be time to consult a locksmith. Fitlocks experts can fix issues such as broken handles and snapped keys using uPVC locks and door mechanisms. They can also reconfigure your double glazing door mechanisms to allow them to operate more easily. Book a double glazing repair with us online, or give us a call to discuss your needs.

Broken Cylinder

A broken cylinder can pose a serious security risk. A professional locksmith can easily repair the cylinder. Locksmiths will need to tap the cylinder in order to fix it. They can do this with an hammer or another tool, but the most efficient method is to employ a long match or a piece of wire. Then, position the end of the match or wire in the keyway. The locksmith can hit the lock to break it open. This is superior to using a hammer that could damage the lock.

Overheating is the primary reason for cylinder heads to crack. This can occur when the block and the cylinder head are made of different metals, such as cast-iron or aluminium. Different metals can heat up and cool down at different rates. This can cause localized hotspots to expand more quickly than the rest.

Another possible cause for cracks in cylinders is corrosion. If the cylinder head and cylinder block are not properly maintained, this can cause corrosion or rust, which may cause them to expand at a higher rate than they should. Over time, this can also cause cracks.

If your uPVC window lock or door is brittle or requires a lot of pressure to turn, this can be caused by several things. A faulty locking mechanism, misalignment or a worn handle are common causes of this issue.

Fortunately it is a simple and inexpensive fix for most homeowners with double glazing. A professional locksmith will usually solve this issue within an hour of arriving at the home. Based on your requirements they will be able to replace the locking mechanism, change the window handles, and change the gearboxes. A professional locksmith will be able to provide you with a recommendation of the most cost-effective option for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders which give you an extra layer of protection from burglars. It's a small price to get the peace of mind that comes from knowing your uPVC door is secured.

Broken Handle

Window handle locks have intricate mechanisms that deteriorate with time and use, so it's no surprise they occasionally break. It can be difficult to determine the reason for a broken window handle lock and then fix it properly.

The issue could be related to the locking mechanism inside or the latch, fixing your broken handle will increase your uPVC double glazing door's security as well as help you to stop drafts. It can be expensive to replace or repair your handle incorrectly and it can also harm the frame and lock of your door.

Screwdriver: With the window open and the screw loose, loosen the handle. The screw should be on the inside of the back plate, and is normally covered by a screw cover for aesthetic reasons. You should not lose any internal components of the handle like the levers and plates on either side. Keep them in the same order so that it is easier to replace if necessary.

Then, using a second screwdriver take the screw off that connects the handle with the spindle on the back. Once the screw is loose, remove the handle and remove the broken spindle. Replace it with a brand new spindle, ensuring that it's the same length (you can purchase them online or in hardware stores). Securely screw it in the frame. Be careful not to overtighten as this could damage the handle or the window frame.

Check that the new handle is fitted, then close and test the handle. It is likely that it will operate smoothly and you'll be able to unlock your window.

While you're working on the handle, don't forget to check your uPVC windows are shut properly. If they're not closing properly, you could experience damp and draughts inside your home, as well as compromising your home's energy efficiency. A local window company, such as Core Sash Windows, will be in a position to adjust the hinges on your window frames so they shut correctly.

Broken Spindle

It is more typical for the spindle to break than the handle. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle that acts as a locking device in the frame of the window. The handle is attached to a central rod which in turn activates cams that look like mushrooms, they secure the frame of the window. If the dead latch mechanism is not able to open when the handle is turned, it is likely that the spindle has been damaged, this can be a very frustrating issue.

There are solutions to this problem. A good locksmith can quickly and efficiently solve the issue. A good locksmith can disassemble the window's handle using a tool that removes the wheel from the area where the spindle is located. This can be done with no damage to the handle or window frame.

Once the wheel is removed, the technician will inspect the spindle and determine what has caused it to break. This involves disassembling the spindle, and then examining each component part, noting any wear or damage. The process is performed in a clean, well-lit room by highly skilled technicians.

Then, clean the damaged spindle. This will help remove any dirt or other debris that might be preventing it from functioning normally. After that, the spindle can be repaired or replaced. If it is replaced, the technician will need a dowel of a similar size to the one used in the first and drill mating holes into both parts of the spindle. This ensures that the new spindle is an exact fit with the handle.

If the spindle that is damaged is beyond repair, it may be necessary to replace it entirely. Home centres sell generic substitutes however if your window style is rare you'll have to speak with a cabinet maker or woodworker who can replicate the exact component. After the spindle is installed, it is connected to the handle. Place the screw holes on the handle with the existing screws in the frame. Once the new handle is installed, you are now ready to operate your uPVC window.